Settings Error

A settings error is caused by settings in Tunerstudio that are not technically possible.

For example, an output is used twice for idle speed control and boost pressure control.
These settings must be corrected. After a voltage reset of the control unit, it is ready for use again.

A firmware update does not solve this problem, as these settings are saved in the MSQ file.
If a settings error occurs, it is not possible to start the engine. The error is usually displayed in plain text.

With firmware V3.2.5, the mini-terminal must be opened, ‘open COM port’, then reset the control unit and the problem is displayed in the text window.
If you are stuck, you can download the MSQ file for your engine under Downloads to bypass the error and start from the beginning.