Skip to main content Skip to search Skip to main navigation
Worldwide shipping
Buy direct from the manufacturer
Do it yourself tuning
Video-Tutorials
Own Knowledge Database

PECU BMW M52

K-Data Logo

Product information "PECU BMW M52"

rusEFI Open-Source Engine Management

PECU M52 – uaEFI Plug & Play for the BMW M52

The PECU M52 (uaEFI Plug & Play) replaces the original Siemens MS41 engine control unit of your BMW M52 inline six with a fully programmable standalone ECU based on the rusEFI open-source platform.

An unmodified uaEFI board plugs in as a module on an adapter board with the original BMW connector. Plug in, tune, drive: no cutting wires, no repinning. Ideal for turbo and supercharger conversions, motorsport and naturally aspirated tuning.

6×
Injection
Sequential
6×
Ignition
BMW coil-on-plug
LSU 4.9
Wideband
On-board
VANOS
Camshaft
Closed loop
P&P
OEM connector
No repinning
CAN
Communication
+ SD logging

Technical Capabilities

Fuel Injection & Ignition

  • 6 sequential injector outputs
  • For the stock high-impedance M52 injectors
  • 6 ignition outputs with on-board IGBT drivers
  • For the original BMW coil-on-plug ignition coils
  • Start-ready base calibration for the M52

Trigger & Sensor Inputs

  • 60-2 crank trigger and cam signal
  • 2 VR and 3 Hall sensor inputs
  • 9 + 2 analog inputs
  • Flex Fuel sensor input
  • Knock sensor input
  • Integrated digital barometric pressure sensor

Engine & Boost Control

  • VANOS control via rusEFI variable cam timing
  • Two DC motor drivers up to 6 A
  • Electronic throttle body / DBW
  • Electronic wastegate control
  • Boost control, launch control, flat shift

Communication & Logging

  • USB communication
  • CAN bus communication
  • Up to two CAN interfaces
  • On-board SD card data logging
  • TunerStudio compatible
  • rusEFI Console support
LSU 4.9
WIDEBAND

Integrated Wideband Lambda Controller

The uaEFI includes an on-board wideband controller for the Bosch LSU 4.9. No separate external controller is required. Lambda data is available directly to the ECU for monitoring, tuning and closed-loop fuel control.

Connecting to the BMW M52

The Plug & Play M52 connects directly to the original engine harness. The adapter board routes the vehicle signals to the uaEFI module.

1

OEM Vehicle Connector

Plug & Play
  • Plugs directly into the original M52 engine harness
  • Injection, ignition, trigger and engine sensors via the OEM connector
  • No cutting, no repinning, fully reversible
2

uaEFI Module

Plug-in module
  • Unmodified uaEFI board on the M52 adapter board
  • Replaceable and reusable in other projects
  • Firmware updates just like any uaEFI
3

Lambda Sensor LSU 4.9

6 Pins
E1 – Heater +
E2 – CalR
E3 – Heater −
E4 – Vs
E5 – Ip
E6 – Vs / Ip
Open Official uaEFI Pinout →
The OEM connector pin assignment is already handled by the adapter board.

Expansion Options

MAP

On-board MAP Sensor

3 bar, KD4400AP already installed.

BT

Bluetooth

Optional JDY-33 module for wireless communication.

EGT

Exhaust Temperature

Optional MAX31855 based EGT input.

CAN 2

Second CAN Bus

Optional second CAN interface.

rusEFI
OPEN-SOURCE FIRMWARE

Powerful & Flexible Software

The uaEFI runs the continuously developed rusEFI engine management firmware. Configuration and tuning are done with TunerStudio and the rusEFI Console.

Functions include fuel and ignition control, boost control, electronic throttle control, idle control, VANOS/VVT, Flex Fuel, CAN communication, Lua scripting, engine protection and extensive data logging. No license fees, no locks.

Installation & Getting Started

Official rusEFI documentation for configuration, firmware installation, first start and diagnostics.

Technical Support & Documentation

Firmware Installation

Firmware updates, installation and recovery.

Open Firmware Guide →

Trigger Configuration

Crank and cam signals, synchronization and setup.

Open Trigger Guide →

Wideband Lambda

LSU 4.9 wiring, configuration and operation.

Open Wideband Guide →

Diagnostics & Logging

Data logging, diagnostics and troubleshooting.

Open Diagnostics Guide →
!

Important Installation Information

The included base calibration is a starting point. Every engine must be tuned individually by a qualified person.

Fits the M52 with Siemens MS41 only. Not suitable for the M52TU with MS42.

Before installation, check your vehicle for deviations from stock (harness, sensors, modifications). Non-standard wiring can damage the ECU or connected components.

Immobilizer (EWS): Before installation, clarify whether the EWS needs to be disabled. We are happy to advise you.

Wideband control requires a Bosch LSU 4.9 sensor (not included).

Operating a programmable ECU may affect your vehicle's road approval and emissions. This device is intended for motorsport and off-road use only.

Official rusEFI Project

Firmware, documentation and additional technical information are available from the official rusEFI project.

Visit rusEFI.com →